Cart 0




FREE UPS GROUND SHIPPING
QUALITY CUSTOMER SERVICE
SATISFACTION GUARANTEED

Systor 1 to 3 NVMe/SATA M.2 Duplicator & Sanitizer - up to 9GB/Min - for PCIe M2, 2.5" & 3.5" HDD & SSD Drives (SYSNVME-XW203)

Systor 1 to 3 NVMe/SATA M.2 Duplicator & Sanitizer - up to 9GB/Min - for PCIe M2, 2.5" & 3.5" HDD & SSD Drives (SYSNVME-XW203)

$2,835.00

* LEAD TIME: 12-17 BUSINESS DAYS

FLEXIBLE CROSS INTERFACE DUPLICATION

Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
  • M.2 (SATA) to M.2 (NVMe)
  • M.2 (NVMe) to HDD/SSD (SATA)
  • HDD/SSD (SATA) to M.2 (NVMe)
  • HDD/SSD (SATA) to HDD/SSD (SATA)

M.2
PCIe NVMe duplication SATA SSD interface types




SUPPORTED DEVICES

  • NVMe M.2
  • SATA M.2
  • SATA 3.5" HDD
  • SATA 2.5" HDD
  • SATA 2.5" SSD

M.2 PCIe NVMe duplicator SATA HDD SSD supported
devices




AUTOMATIC REJECTION OF SLOW DEVICES

Users can set the duplicator's minimum writing speed threshold to prevent/eliminate problematic devices that slow down the duplication and sanitization process.

M.2 PCIe NVMe duplicator auto reject slow SSD
drives

INTELLIGENT DUPLICATION
(COPY MODES)

M.2 PCIe NVMe duplicator copy
System Files only from source to target media
M.2 PCIe NVMe duplicator copy all
partitions from source to target media
Systems and Files
(Quick Copy Mode):

Copies only the data area and skips empty space, reducing the copy duration time.


All Partitions:
Can be set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.

M.2 PCIe NVMe
duplicator copy bit by bit sector by sector from source
to target media
M.2 PCIe NVMe duplicator
copy only a percentage of the source to target media
Whole Media:
Copies from the initial sector to the end, bit-by-bit. There are no format limitations in this mode. Supports all systems and proprietary formats, along with various brands.


Percentage Copy:
Set a selected percentage of source/master capacity to copy.

SKIP BAD SECTORS

Select the numbers of bad sectors to skip from the source drive (ranging from 0 to unlimited) during copy, compare, or erase functions.

SANITIZATION METHODS
(ERASE MODES)

Duplicator erase mode: Quick fast
erase
Duplicator erase mode: Full
complete erase
Quick Erase:
Erases the device's index table, and only takes a few seconds to complete.


Full Erase:
Erases the entire device

Duplicator erase mode: DoD
5220.22-M standards
Duplicator erase mode: NIST
800-88 standards
DoD Erase:
Complies with the erasure standards of the U.S. Department of Defense
(DoD) 5220.22-M.


Secure Erase:
Complies with standards of the National Institute of Standards and Technology
(NIST) 800-88.

COMPARE FUNCTION + CRC CHECKSUM

Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors in order to ensure accuracy of copied data.
After each duplication session, the user simply checks whether the CRC value displayed on the LCD screen is identical.
CRC checksum bit by bit comparison

 

PRODUCT FEATURES

Features
Descriptions
Operation Type
  • Stand-alone, FPGA-based design (no PC required)
Controller Design
  • Embedded controller is designed to support capacities over 18TB+.
  • Constant improvement supports latest market-available devices.
Devices Supported
  • Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:
    • M.2 (SATA) to M.2 (NVMe)
    • M.2 (NVMe) to HDD/SSD (SATA)
    • HDD/SSD (SATA) to M.2 (NVMe)
    • HDD/SSD (SATA) to HDD/SSD (SATA)
Hot Swap Supported
  • Supports hot swapping of devices.
Bandwidth Performance
  • Peak transfer speeds up to 9GB/min. (150MB/sec.)
  • Actual performance is dependent on media transfer speeds.
  • Dedicated bandwidth enables high-volume replications without speed degradation.
Read-Only Or Eraseable Source Port
  • Built-in feature. Enables/disables source media to be erased/sanitized during erase process.
Modular Port Design
  • Replace ports easily to reduce downtime and for cost-effective long-term usage.

 

PRODUCT FUNCTIONS

Features
Descriptions
Copy Modes
  • System and Files (Quick Copy Mode):
    Copies data and skips empty space. Only supports Windows, Mac, and Linux.
  • All Partitions:
    Set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.
  • Whole Media:
    Copies from the initial sector to the end, bit-by-bit. No format limitations. Supports all systems and proprietary formats, along with various brands.
  • Percentage Copy:
    Set a selected percentage of source/master capacity to copy.
Compare (Verification)
  • Performs bit-by-bit comparison with CRC (cyclic redundancy check) to detect errors and ensure accuracy of copied data from source device to target device(s).
Sanitization Modes
  • Quick Erase:
    Erases device index table.
  • Full Erase:
    Erases entire device(s), in compliance with the NIST 800-88 standard.
  • DoD Erase:
    Erases entire device(s), in compliance with the DoD 5220.22-M standard.
  • DoD EraseComp:
    Erases entire device(s) and verifies complete erasure, in compliance with the DoD 5220.22-M standard.
  • Secure Erase:
    Erases non-loadable areas, in compliance with the NIST 800-88 standard.
Skip Bad Sectors
  • Set number of bad sectors to skip during Copy/Compare/Erase.

 

PRODUCT COMPATIBILITIES

Compatibilities
Descriptions
Compatible Devices
  • NGFF (M.2): 2230, 2242, 2260, 2280, 3030, 3042, 3060, and 3080.
  • Supports B+M Key or M Key only
  • mSATA
  • SATA HDD/SSD
Supported Formats
  • Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
  • Whole Device Copy Function: All Formats, including proprietary formats.
  • GPT, MBR, and Advanced Formats.
Supported O/S
  • All (Windows, Mac, Linux, and other proprietary systems).

 

PRODUCT SPECIFICATIONS

Specifications
Descriptions
LCD Display
  • Backlit Monochrome LCD Display
LEDs
  • 3 LED Indicators per Port:
  • Yellow (Power), Green (Pass), and Red (Fail)
Control Panel
  • 4 Push Buttons (▲, ▼, OK, ESC)
Power Requirements
  • AC 100~240 V
Operational Temperature
  • 0°C ~ 60°C (32°F ~ 140°F)
Non-operational Temperature
  • -20°C ~85°C (-4°F ~ 185°F)
Humidity
  • Operating: 20% ~ 80%, non-condensing
  • Non-operating: 5% ~ 95%, non-condensing
Packaging Dimensions (L×W×H)
  • 24 in. x 18 in. x 16 in.
Product Weight
  • 19.4 lbs.
Certifications
  • FCC, CE, and RoHS
ISO/IEC
  • 27037, 27041, 27042, 27043, and 27050

* Specifications are subject to change without notice.


Share this Product


More from this collection