![1 to 8 Standalone SD/microSD Copier/Eraser - ProDuplicator.com](http://www.produplicator.com/cdn/shop/products/8_1024x1024.gif?v=1491510421)
Intelligent 9 Series. Standalone SD/microSD Copier/Eraser
- Standalone, no PC required to operate the duplicator.
- Impeccable copy speed: up to 2GB per min for each port and up to 120 ports.
- Supports all types of data format copying while doing bit for bit duplication.
- Supports “quick copy” for Linux (ext2/ext3/ext4) and NTFS, FAT16/32.
- Easy maintenance for quick swap SD module.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Impeccable High Speed:
SD duplicators are capable of copying at 2GB/m on all devices simultaneously, with no slowing down even the number of targets increases.
![](http://cdn.shopify.com/s/files/1/1482/1392/files/sssfs_large.jpg?v=1476284074)
Supports Linux formats for quick copy features:
Quick copy only copy contained data in any NTFS, Linux (ext2/ext3/ext4) and FAT 16/32 to save your time. Copy all kind of data format while bit for bit duplication.
![](http://www.ureach-usa.com/images/products/sliver/sliver_11.jpg)
Easy Maintenance:
With a specially redesigned and improved structure, users can easily exchange the sockets via THREE steps within ONE minute.
![](http://site.produplicator.com/images/SD/silver_sd_easy.jpg)
Powerful H5 Flash Quality Checking Tool:
Media check-H5 is the best inspection tool that helps to do quality testing with big volume quantity with the highest efficiency.
![](http://site.produplicator.com/images/SD/silver_sd_h5.jpg)
- Highest efficiency:checks the bulk quantity all at the same time.
- Shows quality testing results
- Bad:Bad sector quantity
- W: Writing speed is 7.26MB/s
- R: Reading speed is 14.4MB/s
- Red Light indicates that the Flash didn't meet the selected standard.
- Self-setting standard
- Sets a limitation on the bad sector quantity
- Sets the minimum reading speed
- Sets the minimum writing speed
![](http://www.ureach-usa.com/images/products/sliver/sliver_29.jpg)
Effortless Media Insertion and Removal:
Guide rails to make flash insertion and removal easier, which also greatly enhances production efficiency.
Safely Remove Hardware design:
After the duplication task is completed, the Intelligent 9 SD duplicator will automatically cut down the power and signal to SD devices. Users can remove the SD directly without any concern.
![](http://site.produplicator.com/images/usb/sliver_usb_monitor.jpg)
Monitor and control the real time status via PC.
![](http://www.ureach-usa.com/images/products/sliver/sliver_59.jpg)
Real-time monitoring
![](http://site.produplicator.com/images/usb/sliver_usb_pc.jpg)
One PC can monitor multiple duplicators with the ID differentiation function.
Other features:
- Apply new advanced Multi-Core processor.
- Complete standalone system, no computer required.
- Comply with USA Department of Defense (DoD) data security standard provides DoD Erase function.
- 4 kinds of professional quality diagnostic tools for Flash module.
- "A2 Fake Picker" shows accurate capacity of SD card to get rid of low quality or fake flash media.
- "Speed Check" shows Reading and Writing speed of the Flash module within 8 seconds.
- "H3/H5 Media Check" shows the quantity of bad block though bit for bit examination.
- 2 second format, 3 models available for selection.
- Supports Synchronous and Asynchronous modes for Copy/Compare/ Erase/ Format function.
- Strict bit-by-bit hardware comparison further increases the reliability of duplication.
- User-friendly interface with real time information LCD display.
- Firmware upgrade available with well-experienced team support.
Specification:
Speed | 2GB/m |
Operating Type | Stand-alone |
Supported Media | SD Memory Card, MicroSD Memory Card |
Display | LED(Red/Green) on each slot |
Control Button | 4 push buttons(▲, ▼, OK, ESC) |
Power Supply | 12V 5A adaptor |
Operating Humidity Working | 20% ~ 80% |
Operating Humidity Storage | 5% ~ 95% |
Temperature Extremes Working | 0°C ~ 75°C |
Temperature Extremes Storage | -20°C ~ 85°C |