| Home : Addonics PRO HDUSI5TDR: 1 to 5 Hard Disk Drive Duplicator   | Addonics PRO HDUSI5TDR: 1 to 5 Hard Disk Drive Duplicator
|
|
The Addonics 1:5 HDD (Hard Disk Drive)
Duplicator comes with choice of two models: the PRO and the Deluxe. The
Deluxe model enables duplicating any 3.5" or 2.5" SATA hard drive. The
Pro model is a very flexible one to five hard drive duplicator that
makes copying any 3.5" SATA or IDE hard drive to five 3.5" SATA hard
drives fast and easy. Any 2.5" or 3.5" hard
drive or SSDs can be placed inside the easily removable drive enclosures
for use as a source or a target drive. With optional additional IDE
drive enclosures, practically any hard drives or SDDs with IDE or SATA
interface or in 2.5" and 3.5" form factor can all be mixed in the five
target drive bays to be duplicated at one time. By adding an optional
Diamond Cipher drive enclosure, you can easily make backup of sensitive
data with bullet proof AES-256 bit encryption.
Addonics HDD
duplicator operates totally stand alone. There is no computer needed or
complex software to operate. All the set up are accessed via a LCM control
panel on the front of the unit. Once configured, simply insert up to 5
hard drives of capacity equal or larger than the master drive into the
duplicator, load the master hard drive, lock the drive door and push the
start button to start the copying process.
|
Features
- Great for cloning from one to five
hard drives or for making a back up hard drive
- OS independent
- Copy up to 1.5Gbps depending on the
performance of the hard drive
- Completely standalone one to five hard
drive duplicator with no additional hardware or software required.
- LCM control module provides a rich set
of robust advanced configuration options
- Operate as a stand
alone appliance. No computer or software needed
- Full LCD console
feature list
- Copy a 3.5" or 2.5" SATA or IDE hard
drive/SSD to up to five 3.5" or 2.5" of SATA or IDE hard drive/SSD or
any combination
- Source and Destination drives are
added or removed like tape cartridges via drive enclosure from each
drive bay. Source drive enclosure and target drive enclosure are
interchangeable
- Unit comes bundled with following
drive enclosures:
- 6 SATA drive enclosures - 1 for
source and 5 for target
- 1 IDE drive enclosure - can be used
as source or target
- Optional additional Diamond IDE drive
enclosure, 2.5" to 3.5" IDE connector converter and Diamond Cipher drive
enclosure
Supported Drive Copying Options
|
From Source
|
|
To
Target (up to 5)
|
|
3.5 SATA HDD |
|
3.5" SATA HDD |
|
3.5" SATA HDD |
|
3.5" IDE HDD (1 target only, two or
more IDE targets require additional enclosures as show in note 1
below) |
|
3.5" SATA HDD |
|
2.5" SATA HDD/SSD |
|
3.5" SATA HDD |
|
2.5" IDE HDD/SSD (1 target only, two
or more IDE targets require additional enclosures as show in note 1
below) |
|
3.5" IDE HDD |
|
3.5" SATA HDD |
|
3.5" IDE HDD |
|
3.5" IDE HDD1 |
|
3.5" IDE HDD |
|
2.5" SATA HDD/SSD |
|
3.5" IDE HDD |
|
2.5" IDE HDD/SSD1 |
|
2.5" SATA HDD/SSD |
|
3.5" SATA HDD |
|
2.5" SATA HDD/SSD |
|
3.5" IDE HDD (1 target only, two or
more IDE targets require additional enclosures as show in note 1
below) |
|
2.5" SATA HDD/SSD |
|
2.5" SATA HDD/SSD |
|
2.5" SATA HDD/SSD |
|
2.5" IDE HDD/SSD(1 target only, two or
more IDE targets require additional enclosures as show in note 1
below) |
|
2.5" IDE HDD/SSD |
|
3.5" SATA HDD |
|
2.5" IDE HDD/SSD |
|
3.5" IDE HDD1 |
|
2.5" IDE HDD/SSD |
|
2.5" SATA HDD/SSD |
|
2.5" IDE HDD/SSD |
|
2.5" IDE HDD/SSD1&2 |
|
3.5" SATA HDD |
|
3.5" SATA HDD with AES 256-bit
hardware encryption3
|
|
3.5" IDE HDD |
|
3.5" SATA HDD with AES 256-bit
hardware encryption3
|
|
3.5" SATA HDD |
|
2.5" SATA HDD/SSD with AES 256-bit
hardware encryption3
|
|
3.5" IDE HDD |
|
2.5" SATA HDD/SSD with AES 256-bit
hardware encryption3
|
|
3.5" SATA HDD with AES 256-bit
hardware encryption |
|
3.5" SATA HDD3
|
|
3.5" SATA HDD with AES 256-bit
hardware encryption |
|
3.5" IDE HDD3
|
|
3.5" SATA HDD with AES 256-bit
encryption |
|
2.5" SATA HDD/SSD3 |
|
3.5" SATA HDD with AES 256-bit
hardware encryption |
|
2.5" IDE HDD/SSD3
|
|
2.5" SATA HDD/SDD with AES 256-bit
hardware encryption |
|
2.5" SATA HDD/SSD3
|
|
2.5" SATA HDD/SDD with AES 256-bit
hardware encryption |
|
2.5" IDE HDD/SSD3
|
Note:
-
Requires additional Diamond IDE drive enclosure (model: DISCSB) for each
target drive
-
Requires 2.5" to 3.5" IDE
connector converter (AA25IDE35) for each target drive
-
Requires additional Diamond Cipher drive enclosure (model: DCSACS256)
for every source or target drive.
Data copied to a target drive inside the Diamond Cipher enclosure will
be encrypted with AES 256-bit security. Data in the drive will not be
accessible when remove from the drive enclosure. For detail of Diamond
Cipher feature, please visit Diamond Cipher overview page.
If an non-encrypted hard drive is placed inside the Diamond Cipher drive
enclosure and use as a source drive, no data will be copied as the drive
will appear as a blank drive to the duplicator.
Package Content
- One Storage Tower
- One 1:5 HDD Duplicator Subsystem
- Six Diamond SATA drive enclosures
- One Diamond IDE drive enclosure
- Six Diamond drive cradles
- One 2.5 " -3.5" IDE connector
converter
- User guide
|
|
Writing Mode |
Sector to Sector |
|
Transfer Rate |
Supports up to 1.56bps
*actual transfer
rate depends on the speed of the source and destination drive |
|
Power Supply |
Integrated 80W
110/240 auto-sense |
|
Size (WxDxH)
|
7.5" x 16.7" x 17.2" |
|
Weight |
27.3 lbs |
|
Operating Environment |
0-50° C, 15% - 90% RH |
|
Storage Environment
|
20-85° C, 0% - 95% RH condensing
|
- Sturdy metal frame construction
- Removable drive enclosures for quick insertion and
removal of hard drives
- LCD display with functional control panel
- Well ventilated for efficient air flow
- Low noise high CFM ball bearing cooling fan
|
You May Also Be Interested In: Related Items: Recently Viewed Items: | |
