| Home : Addonics PRO HDUSI3TDR: 1 to 3 Hard Disk Drive Duplicator   | Addonics PRO HDUSI3TDR: 1 to 3 Hard Disk Drive Duplicator
|
 HIGH SPEED! MASS PRODUCE AT A LOW COST!
UPGRADE YOUR SYSTEM TO AN HDD/SSD! |
| |
Systor 1-3
|
Addonics 1-3
|
| |
|
|
Transfer Rate
|
Up to 100MB/sec
|
Up to 70MB/sec
|
Drive Factor Support
|
Hard Disk Drive(HDD) /
Solid State Drive(SSD)
|
Hard Disk Drive(HDD) /
Solid State Drive(SSD)
|
Support Form Factor
|
3.5" & 2.5" Dual Port
(NO Adapter Required)
|
3.5" (2.5", Adapter Required)
|
Wipe / Erase
|
YES
|
YES
|
Warranty
|
3 Yrs Labor &
1 Yr Parts
|
1 Yr Parts
|
Price
|
from $755
|
$1013
|
The Addonics 1:3 HDD
Duplicator comes with choice of two models: the PRO and the Deluxe. The
Deluxe model enables duplicating any 3.5" or 2.5" SATA hard drive. The
Pro model is a very flexible one to three hard drive duplicator that
makes copying any 3.5" SATA or IDE hard drive to three 3.5" SATA hard
drives fast and easy. Any 2.5" or 3.5" hard
drive or SSDs can be placed inside the easily removable drive enclosures
for used as source or target drive. With optional additional IDE drive
enclosures, practically any hard drives or SDDs with IDE or SATA
interface or in 2.5" and 3.5" form factor can all be mixed in the three
target drive bays to be duplicated at one time. By adding an optional
Diamond Cipher drive enclosure, you can easily make backup of sensitive
data with bullet proof AES-256 bit encryption.
Addonics HDD duplicator operates
totally stand alone. There is no computer needed or complex software to
operate. All the set up are accessed via a LCM control panel on the front
of the unit. Once configured, simply insert up to 3 hard drives of
capacity equal or larger than the master drive into the duplicator, load
the master hard drive, lock the drive door and push the start button to
start the copying process.
|
Features
- Great for cloning from one to three hard drives or
for making a back up hard drive
- OS independent
- Copy up to 1.5Gbps depending on the performance of
the hard drive
- Completely standalone one to three hard drive
duplicator with no additional hardware or software required.
- LCM control module provides a rich set of robust
advanced configuration options
- Operate as a stand alone
appliance. No computer or software needed
- Full LCD console feature list
- Completely standalone onne to three hard drive
duplicator with no additional hardware or software required.
- Source and Destination drives are added or removed
like tape cartridges via drive enclosure from each drive bay. Source
drive enclosure and target drive enclosure are interchangeable.
- Unit comes bundled with following drive enclosures:
- 4 SATA drive enclosures - 1 for source and 3 for
target
- 1 IDE drive enclosure - can be used as source or
target
- Optional additional Diamond IDE drive
enclosure, 2.5" to 3.5" IDE connector converter and Diamond Cipher drive
enclosure
Supported Drive
Copying Options
|
From Source |
|
To Target
(up to 3) |
|
3.5 SATA HDD |
|
3.5" SATA HDD
|
|
3.5" SATA HDD |
|
3.5" IDE HDD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
|
| 3.5" SATA HDD
|
|
2.5" SATA HDD/SSD
|
|
3.5" SATA HDD |
|
2.5" IDE HDD/SSD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
|
| 3.5" IDE HDD |
|
3.5" SATA HDD |
|
3.5" IDE HDD |
|
3.5" IDE HDD1
|
| 3.5" IDE HDD |
|
2.5" SATA HDD/SSD |
|
3.5" IDE HDD |
|
2.5" IDE HDD/SSD1
|
| 2.5" SATA HDD/SSD |
|
3.5" SATA HDD |
|
2.5" SATA HDD/SSD |
|
3.5" IDE HDD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
|
| 2.5" SATA HDD/SSD
|
|
2.5" SATA HDD/SSD |
|
2.5" SATA HDD/SSD |
|
2.5" IDE HDD/SSD(1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
|
| 2.5" IDE HDD/SSD |
|
3.5" SATA HDD |
|
2.5" IDE HDD/SSD |
|
3.5" IDE HDD1
|
| 2.5" IDE HDD/SSD
|
|
2.5" SATA HDD/SSD |
|
2.5" IDE HDD/SSD |
|
2.5" IDE HDD/SSD1
& 2 |
| 3.5" SATA HDD |
|
3.5" SATA HDD with AES 256-bit hardware encryption3
|
|
3.5" IDE HDD |
|
3.5" SATA HDD with AES 256-bit hardware encryption3
|
| 3.5" SATA HDD |
|
2.5" SATA HDD/SSD with AES 256-bit hardware encryption3
|
|
3.5" IDE HDD |
|
2.5" SATA HDD/SSD with AES 256-bit hardware encryption3
|
| 3.5" SATA HDD with AES 256-bit hardware encryption |
|
3.5" SATA HDD3
|
|
3.5" SATA HDD with AES 256-bit hardware encryption
|
|
3.5" IDE HDD3
|
| 3.5" SATA HDD with AES 256-bit encryption |
|
2.5" SATA HDD/SSD3
|
|
3.5" SATA HDD with AES 256-bit hardware encryption
|
|
2.5" IDE HDD/SSD3
|
| 2.5" SATA HDD/SDD with AES 256-bit hardware encryption
|
|
2.5" SATA HDD/SSD3
|
|
2.5" SATA HDD/SDD with AES 256-bit hardware encryption
|
|
2.5" IDE HDD/SSD3
|
Note:
- Requires additional Diamond IDE drive enclosure (model: DISCSB) for each target drive
-
Requires 2.5" to 3.5" IDE connector converter (AA25IDE35) for each
target drive
- Requires additional Diamond Cipher drive enclosure (model: DCSACS256) for every source or target drive.
Data copied to a target drive inside the Diamond Cipher enclosure will
be encrypted with AES 256-bit security. Data in the drive will not be
accessible when remove from the drive enclosure. For detail of Diamond
Cipher feature, please visit Diamond Cipher overview page.
If an non-encrypted hard drive is placed inside the Diamond Cipher
drive enclosure and use as a source drive, no data will be copied as
the drive will appear as a blank drive to the duplicator.
-
Requires 1 additional Snap-In 25 (model: AE25SN35SA) unit for each
target drive
Package Content
- One Storage Tower
- One 1:5 HDD Duplicator Subsystem
- Four Diamond SATA drive enclosures
- One Diamond IDE drive enclosure
- Four Diamond drive cradles
- One 2.5" -3.5" IDE connector converter
- User guide
|
|
Writing Mode |
Sector to Sector |
|
Transfer Rate |
Supports up to 70MB/sec
*actual transfer
rate depends on the speed of the source and destination drive |
|
Power Supply |
Integrated 80W
110/240 auto-sense |
|
Size (WxDxH)
|
7.5" x 16" x 10.4" |
|
Weight |
17.43 lbs |
|
Operating Environment |
0-50° C, 15% - 90% RH |
|
Storage Environment
|
20-85° C, 0% - 95% RH condensing
|
- Sturdy metal frame construction
- Removable drive enclosures for quick insertion and
removal of hard drives
- LCD display with functional control panel
- Well ventilated for efficient air flow
- Low noise high CFM ball bearing cooling fan
|
You May Also Be Interested In: Related Items: Recently Viewed Items: | |
