Home : Addonics HDUS325: 1 to 3 2.5" Hard Disk Drive Duplicator   | Addonics HDUS325: 1 to 3 2.5" Hard Disk Drive Duplicator
|
 HIGH SPEED! MASS PRODUCE AT A LOW COST!
UPGRADE YOUR SYSTEM TO AN HDD/SSD! |
| |
Systor 1-3
|
Addonics 1-3
|
| |
|
|
Transfer Rate
|
Up to 100MB/sec
|
Up to 70MB/sec
|
Drive Factor Support
|
Hard Disk Drive(HDD) /
Solid State Drive(SSD)
|
Hard Disk Drive(HDD) /
Solid State Drive(SSD)
|
Support Form Factor
|
3.5" & 2.5" Dual Port
(NO Adapter Required)
|
2.5" Only
|
Wipe / Erase
|
YES
|
YES
|
Warranty
|
3 Yrs Labor &
1 Yr Parts
|
1 Yr Parts
|
Price
|
from $755
|
$1013
|
The
Addonics family of 2.5" duplicator is an economical hard drive
duplicator solution with choice of copying from one to three or from one
to five 2.5" SATA hard drives. There is no computer needed or complex
software to operate. Just open the doors on the drive bays, load your
master hard drive to the drive bay on top and other hard drives of
capacity equal or larger below the master drive bay, lock the drive
doors and push the start button to start the copying process.
Features
- Copy up to three 2.5" SATA hard
drives
- Great for cloning another hard drive
or for making a back up hard drive
- OS independent
- Copy up to 70MB/sec depending on the
performance of the hard drive
- Source and Destination drives are
added or removed like tape cartridges from each drive bay with no
special tool required.
- Completely standalone One to Three
hard drive duplicator with no additional hardware or software
required.
- LCM control module provides a rich
set of robust advanced configuration options (diagram of duplicator
features can be here)
- Operate as a
stand alone appliance. No computer or software needed
- Full LCD
console feature list
Package Content
- One Storage Tower
- One 1:5 HDD Duplicator Subsystem
- Two Snap-In Double Drive
- Two 3.5" to 5.1/4" drive bay
mounting bracket
- User guide
|
|
New Page 2
|
Writing Mode |
Sector to Sector |
|
Transfer Rate |
Supports up to 70MB/sec
* actual transfer rate depends on the speed of the source and
destination drive |
|
Power Supply |
Integrated 80W 110/240 auto-sense |
|
Size (WxDxH)
|
7.48" X 10.63" X 6.5"
|
|
Weight |
8lbs |
|
Operating Environment |
0-50° C, 15% - 90% RH |
|
Storage Environment
|
20-85° C, 0% - 95% RH condensing
|
- Sturdy metal frame construction
- Snap-In Double Drive to swap out bare
drive without requiring tools
- LCD display with functional control
panel
- Well ventilated for efficient air flow
- Low noise high CFM ball bearing
cooling fan
|
|
You May Also Be Interested In: Related Items: Recently Viewed Items: | 
